Hi,all
cisco 2610, 3 BRIs, I use it to connect to Internet.
I configure the interfaces like this,
Interface BRI1/0
no ip address
ip nat outside
encapsulation ppp
dialer rotary-group 0
Interface BRI1/1
no ip address
ip nat outside
encapsulation ppp
dialer rotary-group 0
Interface BRI1/2
no ip address
ip nat outside
encapsulation ppp
dialer rotary-group 0
Interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
dialer in-band
dialer idle-timeout 180
dialer string xxx
dialer load-threshold 1 either
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxx password xxx
It will bring up all 6 B-channels,and I can connect to Internet via it.
But it seems only 1 channel is used because I found that the speed of the
ftp task cannot exceed 64K bits/second.
Thinking the B-channels should be bundled up, I use "ppp multilink" for
Interface Dialer0 (right?). The B-channels can still be brought up, but
the PCs inside the E0/0 cannot connect to outside then.
Anyone can help me?
Thanks in advance.
Winway
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13943&t=13943
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
