I have a router interconnecting 2 LAN. I want to set up another router for
backup (router redundancy). I have used 2 different standby IP address (one
for each LAN).
In the router configuration I'am doing NAT also. I heard that a router could
not do HSRP and NAT at the same time. That it was a bug. Can somebody
clarify me on that.
Thank you.
-----Message d'origine-----
De : Erick B. [mailto:[EMAIL PROTECTED]]
Envoyi : lundi 30 juillet 2001 12:52
@ : [EMAIL PROTECTED]
Objet : Re: HSRP [7:14135]
I don't quite understand what your asking, but...
IOS will not let you configure the same HSRP/standby
address or IP subnet on multiple LAN interfaces. You
would have to use a different IP subnet on each
Ethernet interface with a HSRP/standby address in that
subnet.
Were you asking that or ?
--- BASSOLE Rock wrote:
> Hello group,
>
>
> I want to know if there are problems on doing a
> double HSRP (ethernet1 and
> ethernet0) with 2 routers (same configuration).
> Have you ever incounter any
> problems (Duplicate addresse, NAT, ...).
>
> Thank you.
>
> Rock BASSOLE
> Til: +33 (0) 1 45 96 22 03
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14153&t=14135
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
