So how do you put the ios on them? (just curious) I've never had to
troubleshoot a 2500. The only 2500 we have ever had, just sits there and
routes no problem...
>>> "John Neiberger" 07/31/01 12:58PM >>>
The 2500 series can not do XMODEM. Also, these are not run-from-RAM
devices; they run from flash. The 2600 series can do what you are
attempting but not the 2500s.
Regards,
John
>>> "Scott Lokey" 7/31/01 10:17:30 AM >>>
Hi,
I have 3 2500's that have 16meg RAM but no Flash memory. I had read
where
you could boot to ROMMON> and issue an XMODEM command and have the IOS
transfered to the box. There is also a option to load it into RAM and
run it
(-r I think).
Sounded good but when I boot to ROMMON, the xmodem command is not
there. I
have the latest boot ROM from Cisco on these as well. What gives?
Documentation wrong? Am I doing something wrong? Is this even
possible?
Thanks for the help,
Scott
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14383&t=14375
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
