Hi
It has been a while since I've touched a 5000 but...
Can you ping the syslog server from the Cat?
If not, you may need to add a route so that the console knows how to get to
the syslog server (set ip route ...)
HTH
RM
Dennis H wrote:
>
> I'm trying to get remote logging enabled on a Cat5509 and could
> use some
> advice. I have everything set up according to Cisco's site but
> messages do
> not make it to the syslog server. The sc0 is configured with
> an ip and
> gateway and I can ping and telnet to the syslog box. I have
> the severity
> and facility set up properly. I do receive messages on the
> syslog server
> from the RSFC but not from the Cat itself. The syslog server
> is on a
> different subnet and vlan than the Cat management interface and
> all I can
> figure is syslog messages aren't getting routed for some
> reason. But like I
> said ping and telnet work... hmmmmmmm
>
> Any ideas???
>
> Thanks,
>
> Dennis
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14390&t=14188
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
