VoIP Traffic Shaping Config [7:14451]

[Oletu Hosea Godswill CCNA, CCDA, CCNP.]

Hi folks,

Hope this newsgroup does not make me lazy!!!
hehehehehe

I have a problem guys.  I have a Cisco 3640 configured
with an FXS voice module (2 voice ports).  I am
contending with a 28.8k link to my head office.  I do
voice and data on that link.  However, i need to
restrict my voice calls to one at a time.  I have done
some QOS on that link. In addition, i want the two
voice ports on the FXS VIC to be operational.  Is
there a command which i can use to disable one voice
port automatically when i am using the second port?
What i really mean is to have one port disabled as
soon as i pick up the handset attached to the other
port.  You get what i mean?  Well the reason behind
this is that i don't want my colleagues (who think
28.8k is a heaven)to use more than one handset at a
time to call the head office.  But i want port 3/1/0
and port 3/1/1 to be active so that any can be used at
any time (not simultaenously).

Regards!!!
Oletu




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14451&t=14451
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]