Hi, Do this - rommon 1> tftpdnld rommon 2> set rommon 3> IP_ADDRESS=A.B.C.D (IP address of the enet of router) rommon 4> IP_SUBNET_MASK=255.255.255.0 (Or mask of the network) rommon 5> DEFAULT_GATEWAY=192.10.10.20 rommon 6> TFTP_SERVER=192.10.10.20 rommon 7> TFTP_FILE=c3660-js-mz.120-7.XK2.bin..bin rommon 8> tftpdnld It shld be thru. Syntax is key Uttam ss ss wrote: > Hi all!! > In our 3660 cisco router IOS has got corrupted(FLASH IOS) & Iam not able to > boot thro. ROM also (ROM BOOT not working).The only mode which is working is > ROMMON mode.When I try to load the IOS thro XMODEM I gt the following > error(In ROMMON mode) > > rommon 1 > xmodem c3660-js-mz.120-7.XK2.bin..bin > Do not start the sending program yet... > File size Checksum File name > 8059392 bytes (0x7afa00) 0x7520 c3660-js-mz.120-7.XK2.bin..bin > > WARNING: All existing data in flash will be lost! > Invoke this application only for disaster recovery. > Do you wish to continue? y/n [n]: y > Ready to receive file c3660-js-mz.120-7.XK2.bin..bin ... > BB0BB0 > Timeout waiting for data - aborting download... > rommon 2 > confreg 0x2101 > > rommon 3 > reset > > System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > Copyright (c) 1999 by cisco Systems, Inc. > C3660 processor with 65536 Kbytes of main memory > Main memory is configured to 64 bit mode with parity disabled > > loadprog: error - on read during ELF program load > requested 10471860 (0x9fc9b4) bytes, got 8039940 (0x7aae04) > boot: cannot load "flash:" > > System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > Copyright (c) 1999 by cisco Systems, Inc. > C3660 processor with 65536 Kbytes of main memory > Main memory is configured to 64 bit mode with parity disabled > > rommon 1 > b > loadprog: error - on read during ELF program load > requested 10471860 (0x9fc9b4) bytes, got 8039940 (0x7aae04) > boot: cannot load "flash:" > > So as u see in the above output I hv tried XModem & also ROMboot but without > any success.Also I tried loading the backup of the IOS for 3660 which i > had,thro. TFTP server by giving the following command > > b c3660-js-mz.120-7.XK2.bin..bin:192.10.10.20 > > where 192.10.10.20 is the address of the TFTP server but no use. > > If any one of u hv faced similar problem,Can u pl. mail the solution with > detailed sequence of steps to solve it. > > Thanx & warm regards > ss2001 [GroupStudy.com removed an attachment of type text/x-vcard which had a name of umajumdar.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14623&t=14616 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
