Hey all: Got a PIX running 6.0 here, and I'm running Rip v2. Everything is working cool, I am passing Ripv2 updates between the PIX and my routers. But I cannot use any authentication. No matter how many ways I do the authentication, the Pix and the routers will not pass authenticated updates. I do debug, and I keep getting complaints about how the authentication is bad, etc. Note, I can get the various routers to authenticate to each other just fine. The part that is broken is the authentication from router to PIX. I have checked about 1000 times that the keystring is the same, and the same authentication mode is being used, so I'm sure that part is OK. So, has anybody ever gotten this to work? I don't want to waste more time on it and then find out it's just a general bug and it will never work. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14699&t=14699 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
