I doubt the cir is set to zero, it almost certainly is set to a value below
the 1.5 meg value, I'd suspect 768k perhaps. Whomever is the circuit owner
can call the telco to find out.
Brian
----- Original Message -----
From: "Mike Mandulak"
To:
Sent: Tuesday, August 07, 2001 9:16 PM
Subject: DE bits [7:15210]
> Do discard Eligible bits (DE) get set on lines that are full T1's? The
> circuit I'm looking at is a full T1 to one of my internet providers and
when
> looking at the frame stats (using cisco LMI) I see that that the cir is
set
> to zero which would mean that all frames leave my site with the DE bit
set.
> Am I misunderstanding this?
>
> MikeM
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15275&t=15210
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
