Patrick,
This just means that the port lost a connection to the end device, it's
possible that its cause by a pc being rebooted, unlikely a duplex mismatch,
or config, could be NIC or cable.
Best thing is to set it to auto and see what happens, remember if you have
one side auto and the other hard coded then the auto will ALWAYS be
half-duplex.....
Brian
-----Original Message-----
From: Patrick Donlon [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 08, 2001 1:33 PM
To: [EMAIL PROTECTED]
Subject: Cat 6.5K error messages [7:15241]
I have a cat' that is giving me these messages on the console:
06:02:18 MET +02:00 %PAGP-5-PORTFROMSTP:Port 8/48 left bridge port 8/48
06:02:35 MET +02:00 %PAGP-5-PORTTOSTP:Port 8/48 joined bridge port 8/48.
>From the CCO I've read that it could be a duplex mis-match, faulty NIC,
cable or mis-configuration.
How can I find out from the switch stat's which is most likely?
cheers Pat
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15291&t=15241
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
