Hi All,
One of my router does not recieve the routing update on RIP. Here is the
"show
ip protocol".
R4#sh ip prot
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 3 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Key-chain
Serial0 2 2
Routing for Networks:
70.0.0.0
130.0.0.0
Routing Information Sources:
Gateway Distance Last Update
Distance: (default is 120)
After I turn on the debug ip rip events, Here is the message:
RIP: sending v2 update to 224.0.0.9 via Serial0 (70.0.0.2) - suppressing null
update
RIP: sending v2 update to 224.0.0.9 via Serial0 (70.0.0.2) - suppressing null
update
RIP: sending v2 update to 224.0.0.9 via Serial0 (70.0.0.2) - suppressing null
update
Anyone knows what is wrong and how to configure the router to get the update.
Thanks in advance.
Best regards
Francis Tsui
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15469&t=15469
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
