They are the same interface
----- Original Message -----
From: "Vik"
To:
Sent: Monday, August 13, 2001 6:35 AM
Subject: e0 on 4000-m router [7:15861]
> I have a Cisco 4000 with 2 serial, 1 token ring and 2 ethernet interface.
> However, when a "show interfaces" command is executed, there is only one
> ethernet interface shown.
>
> On the back of the router where the ethernet ports are, one is a typical
> 10baseT, RJ-45 connection, but the other is AUI which I do not have a
> transceiver for; I just have a CAT5 cable from the 10baseT connector going
> to my switch.
>
> When I do a show interfaces command, ethernet 0 is up, but the protocol is
> down. On my swith I do not see any activity lights for that port, so I am
> thinking that my e0 is actually the AUI port.
>
> How do I use the 10baseT interface?
>
> --
> Vik Evans - MCSE, CCNA, CCDA
> [EMAIL PROTECTED]
> Cell: (602) 677-8214
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15868&t=15861
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
