Hello group,
Sorry if this has been covered before, I've checked the archives and I can't
seem to find anything relevant to my question.
I have a 2524 with a built in FT1/T1 csu-dsu module, and I wish to connect
it back to back with a 2501 (DB-60 on the serial port).
I'm trying to figure out how I could go about doing it without having to
attempt to find a 5-in-1 serial module for the 2524. Do I need to get
another csu/dsu for the 2501 and then connect them together that way (with
the RJ-45 cable from the 2524 going into the other csu/dsu, then the
V.35/DB-60 going into the 2501 serial port)?
Sorry for the basic question, if anyone out there has done this, I would
greatly appreciate hearing from you. Appreciate any and all help with this,
links, etc. are also greatly appreciated.
Thanks!
-Chuck
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16028&t=16028
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
