Got a WINS server configured on the host you are testing? You need that for
browsing across subnets.
Tony M.
#6172
----- Original Message -----
From: "Charles Perry"
To:
Sent: Tuesday, August 14, 2001 9:45 AM
Subject: Cisco 3660 Router Config [7:16048]
> Im not an expert just a cisco hack with a couple configs under my belt. I
> added another subnet to our network and set IP address to ethernet3/1 and
a
> couple access list entries. The problem is I can ping across the subnets
> fine, and can access resources (those not needing domain authorization) by
> IP but not by name, so therefore it will also not see the domain or browse
> the network. The new subnet also has no problm acessing the intenet via
the
> T1 on the router.
> Any ideas would be nice
>
> Configuration in attachment.
>
>
>
>
>
>
>
>
>
> [demime removed a uuencoded section named Document.rtf which was 120
lines]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16061&t=16048
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
