If you have the right chassis you could use an Integrated T1 MFT card, which
I believe, allows splitting of voice and data.
-----Original Message-----
From: dragi radovanovic [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 17, 2001 7:53 AM
To: [EMAIL PROTECTED]
Subject: RE: To CSU/DSU or not to CSU/DSU [7:16368]
Jim,
look at it from this perspective:
with an external CSU/DSU you will have two possible point of failure: the
CSU/DSU and the serial interface (WIC-1T). If you go with wic-1dsu-t1, and
something happens on that link, it is easier to troubleshoot the problem on
the wic-1dsu-t1.
The problem with this card is that you can't split voice and data, not can
you play with cable lenghts.
Regards,
Dragi
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16396&t=16368
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
