Bingo! Sup III cards use a straight ethernet patch cord. Welcome to the club
of those who have been skunked by that one.
> -----Original Message-----
> From: Anand Ghody [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 20, 2001 8:27 AM
> To: [EMAIL PROTECTED]
> Subject: help, catalyst 5500 console connectivity. [7:16523]
>
>
> I just bought a catalyst 5505 from ebay and I am having
> trouble with the
> console port. I am using one of the console cables that I
> use with some
> other cisco routers. My hyperterminal terminal setting are
> 9600-8-none-1, no flow control. the switch when booted goes
> through its
> diagnostics and boots fine. everything looks good except I can not
> connect to it to configure it. Do the cataylst use a pinout different
> than that of a router. Any one got any ideas?
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16554&t=16523
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
