On a Sup I card there is a jumper "diag" that will put you in a more basic
OS. Have you done that?
> -----Original Message-----
> From: Kwame [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 20, 2001 10:47 AM
> To: [EMAIL PROTECTED]
> Subject: Cat5000 Upgrade Failure Recovery. [7:16563]
>
>
> This a catalyst 5000 with Supervisor Engine I. Image upgrade failed
> resulting in the switch going into a power reset loop
> immediately after
> completing the boot process. Suspecting a corrupted image, I
> decided to go
> into rommon mode and download a fresh image. Can't use tftp
> because I can't
> get IP to work from rommon mode. Serial download via console
> also doesn't
> work because as soon as the DOWNLOAD SERIAL command is
> issued, the switch
> does a warm reset.
>
> Any ideas?
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16570&t=16563
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
