On Tue, 21 Aug 2001, Donald B Johnson jr wrote:
> How do you set up a sw as a full mesh and a network as a HUB and Spoke. I
> dont understand.
Because you only use some of the DLCI's, not all of them.
> ----- Original Message -----
> From: "Cisco Lover"
> To:
> Sent: Tuesday, August 21, 2001 7:08 AM
> Subject: Fwd: For FR Grus.... [7:16635]
>
>
> > Oopss....
> >
> > Sorry guys...I donto know where it lost in b/w..Any way..I have write it
> > here again.
> >
> > Thanks for the kind replies..
> > For eg,
> >
> > our FR switch is setup for Full mesh,But out network is setup as Hub &
> Spoke
> > environment.In that case there must be some unused DLCI's on spoke
routers
> > which we would still be seeing as active on these routers although they
> > would be of no use offcourse for this envioronmetnt.
> > Is there any way If we can get rid of these DLCIS on the spokes.i.e to
> > disable them or USE any method which block them to be appearing on spoek
> > routers.(without touching FR switch)
> >
> > I know ....Must be confusing for majority here ..But ..
> >
> > I AM SURE I WILL GET THE SOLUTION HERE AS WELL.
> >
> >
> > Thanks.
> >
> >
> >
> >
> >
> > >From: "Cisco Lover"
> > >Reply-To: "Cisco Lover"
> > >To: [EMAIL PROTECTED]
> > >Subject: For FR Grus.... [7:16635]
> > >Date: Tue, 21 Aug 2001 07:06:08 -0400
> > >
> > >Hi Guys..
> > >
> > >Come with some New Queston..
> > >
> > >For eg,
> > >our FR switch is setup for Full mesh,But out network is setup as Hub &
> > >Spoke
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp
I'm buying / selling used CISCO gear!!
email me for a quote
Brian Feeny, CCIE #8036 Scarlett Parria
[EMAIL PROTECTED] [EMAIL PROTECTED]
318-213-4709 318-213-4701
Netjam, LLC http://www.netjam.net
333 Texas St. VISA/MC/AMEX/COD
Suite 1401 30 day warranty
Shreveport, LA 71101 Cisco Channel Partner
toll free: 866-2NETJAM
phone: 318-212-0245
fax: 318-212-0246
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16676&t=16635
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
