You don't need IP PLUS for this.
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Peter Slow [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 21, 2001 4:03 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet interface as DHCP client? [7:16724]
yuppers.
HEY MY EMAIL WORKS!
...but anyway, as of IOS 12.1.2(T)
the command "ip address dhcp" is functional.
..it works, too.
put a T-train image later than 12.1.2 on yer router, and you'll be all set.
I am not sure if you need ip plus for this. i dont think so, but it's
posssible.
-----Original Message-----
From: Leigh Anne Chisholm [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 21, 2001 4:33 PM
To: [EMAIL PROTECTED]
Subject: Ethernet interface as DHCP client? [7:16724]
I'm playing around with this and I've been concentrating my focus on EasyIP.
It would appear that only dialer interfaces are able to obtain an address
via DHCP. I want my Ethernet interface to get an IP address dynamically.
Has anyone done this? Can anyone give me some guidance if it is possible.
IS it possible?
-- Leigh Anne
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16733&t=16724
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
