Last time I looked it up, Unless software has changed, the 2948G-L3 only
supported standard access-lists.
I could be wrong, did you try upgrading software ?
Tony M.
----- Original Message -----
From: "sam sneed"
To:
Sent: Wednesday, August 22, 2001 7:42 AM
Subject: access-lists supported on 2948G-L3? [7:16810]
> I was trying to set up accesslists on an interface on a 2948G-L3 switch
last
> night for an hour to no avail. The switch showed my access-list when doing
a
> sh ip int fa47 and the list was correct. I even applied a new list stating
> only deny ip any any. Traffic still came through . It was applied
correctly
> as inbound as well. I did show logging and saw:
>
> 45w4d: ACL card not present for interface FastEthernet47
> 45w4d: %SYS-5-CONFIG_I: Configured from console by vty0 (172.16.10.100)
> 45w4d: %SYS-5-CONFIG_I: Configured from console by vty0 (172.16.10.100)
> 45w4d: ACL card not present for interface FastEthernet47
> 45w4d: %SYS-5-CONFIG_I: Configured from console by vty0 (172.16.10.100)
>
> It looks like I need and ACL card. I never heard of this, has anyone else?
> This is an $8000 switch capable of CEF, MLS and a while bunch of other
> features.
> Please don't tell that with all these features it can't do access-lists as
> is. Its classified as a distrubution layer switch, where ironically Cisco
> says to put your access-lists in their design model and I can't seem to
get
> it going.
>
> any help would be appreciated...
>
>
> sam sneed
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16817&t=16810
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
