Dave,
You can do some filtering. There are specific access lists that you can use
for SAP filtering (access-list 1000-1099) and for filtering NLSP route
aggregation (access-list 1200-1299).
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/6rbook/6ripx.htm
HTH,
Karen
*********** REPLY SEPARATOR ***********
On 8/17/2001 at 4:28 PM news-server.woh.rr.com wrote:
>I'm looking for confirmation that SAP filtering is not possible with NLSP. I
>have a hub/spoke network and want to receive all SAP updates from remote
>sites, but don't want to flood certain SAP's to my other locations. I have
>applied output-sap-filter with no success and also ipx access-group sap out
>with no success.
>
>I found a reference on CCO's Open Forum from 1998 stating that SAP filtering
>is not supported on this link-state protocol.
>
>Can anyone confirm this for me?
>
>Thanks.
>Dave
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16931&t=16418
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
