I did change the config-register to 0x2102 (that's what was shown in "sh
version"). Yet the router still boots to rommon. I will try issuing the
confreg 0x2102 command in rommon, but I don't see how that will help.
Would the fact that this router is actually a route switch module using a
flash card possibly change the configuration steps?
Regards,
Sean
""richard dumoulin"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I think you should change the config-register to a value like 0x2102 or
> something finishing with 2. If I remember well, the number 2 means that
the
> router should load the ios from flash.I believe you have set this value to
> something like 0x2101 or 0x2100.
>
> Regards.
>
> note: I need to check this, as I am forgetting the CCNA stuff :)
>
> note2: to change the register, you can try "?" to see which rommon os
> command will let you do it. In certain rommon the command is confreg
0x2102
> and in others it is o/r 0x2102.Then you issue boot or "i" to boot the
router.
>
> Regards.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16940&t=16890
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
