Yes. I did it using DB60 to RS232 cables plus 25 pin to RJ45 adapter and a
rollover cable. I was successful with both a DTE male cable and a DCE female
cable. CAB-232MT= 72-0793-01, CAB-232FC= 72-0794-01.
> -----Original Message-----
> From: NetEng [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 23, 2001 2:15 PM
> To: [EMAIL PROTECTED]
> Subject: 2521 uses [7:17033]
>
>
> Hi-
>
> I have a 2521, which has 2 low-speed asynch ports. Can I use
> these ports for
> reverse-telnet? TIA.
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17041&t=17033
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
