Ask the seller to connect via the console and send you the results of the
power-up self test. Have the seller enter some show commands, such as show
system, show test, show interface, show port, and send you the results. I'm
not a Catalyst 5500 expert but I think those are right.
Priscilla
>On Thu, 23 Aug 2001, Sanjay Chaudhry wrote:
>
> > Hi Everyone,
> > I'm trying to buy a refurbished switch with the following
> > specifications:
> >
> > =====================================================
> > Cisco Catalyst 5505 w/ Supervisor Engine II WS-X5506
> >
> > Included in the Chassis:
> >
> > One WS-C5505 Chassis 5 slot Chassis
> > 1 Supervisor Engine II (WS-X5506)
> >
> > 1 AC Power Supply
> > 1 12 PORT 100BaseTX Ethernet (WS-X5113)
> > 1 AC Cord
> > 1 Console Kit
> > =====================================================
> >
> > There is no guarantee against DOA from seller. I'll be responsible for
> > everything after the sale!!
> > I'm a recent CCNA. This is intended for my CCNP/CCIE lab. I'll need your
> > advice here... I don't even know if Flash/RAM should have been mentioned
> > in the switch specs and are missing...
> > Your input is highly valued.
> > Thanks,
> > Sanjay
________________________
Priscilla Oppenheimer
http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17074&t=17045
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
