Don,
The 1900 CLI is not the same as the 5000, but if you'd like, feel free to
download my free homemade Cat5000 set-based command trainer by following the
RouterChief link below.
Have a great weekend,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Don Claybrook [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 24, 2001 1:44 PM
To: [EMAIL PROTECTED]
Subject: 1900 CLI Same as Cat5K? [7:17177]
Hello, all.
I hope I'm not being redundant redundant, but I can't locate this in the
archives, so here goes:
I haven't had the occasion to do much with either the Catalyst 5000 or the
1900 series, I've only worked with 2912/24. For purposes of studying for an
eventual CCIE lab, are the 'set' and 'clear' commands pretty much the same
for
both series? To get right to the point, can I purchase the cheaper 1900
series and essentially learn the CLI structure of the Catalyst 5000 in this
manner?
Thanks,
Don
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17189&t=17177
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
