The inverse mask on this is likely incorrect, if yoy want it to be for
half a class c, you want 0.0.0.127
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Fri, 24 Aug 2001, Midnight Man wrote:
> You should change the order of your commands
> Line vty 0 4
> access-class 55 in
> access-list 55 permit 202.157.78.0 0.0.0.128
>
> For sure it will run correctly
> gook luck
> MNM
> --- kaushalenders wrote:
> > hi ,
> > hi i have made a access list to restrict telnet on
> > my router from other
> > network but when i implemented on vty it was no
> > working .Pls help
> > the acesslist wass
> > access-list 55 permit 202.157.78.0 0.0.0.128
> > line vty 0 4
> > access-class 55 in
> >
> > but it restricted the whole network
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17190&t=17097
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
