Here goes. I can un-partition FLASH for a total of 16 Megs & 16 Megs RAM,
but the router does not seem to want to use the 16/16 combination to run
anything beyond 11.3 (even though 12.x will fit).
4000>show version
Cisco Internetwork Operating System Software
IOS (tm) 4000 Software (C4000-JS-M), Version 11.3(11a), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 20-Sep-99 14:43 by jjgreen
Image text-base: 0x00012000, data-base: 0x00855A88
ROM: System Bootstrap, Version 5.2(13a), RELEASE SOFTWARE
ROM: 4000 Bootstrap Software (XX-RXBOOT), Version 10.2(13a), RELEASE
SOFTWARE (fc1)
4000 uptime is 33 minutes
System restarted by power-on
System image file is "flash:c4000-js-mz.113-11a.bin", booted via flash
cisco 4000 (68030) processor (revision 0xA0) with 16384K/1024K bytes of
memory.
Processor board ID 5017715
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
2 Token Ring/IEEE 802.5 interface(s)
4 Serial network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read/Write)
8192K bytes of processor board System flash partition 2 (Read/Write)
Configuration register is 0x2102
Phil
----- Original Message -----
From: "Erick B."
To:
Sent: Saturday, August 25, 2001 2:32 PM
Subject: Re: IOS & 4000 Routers [7:17202]
> Can you post a copy of 'show version' here?
>
> I have 12.1(9) mainline running on a 4000-M. Thats the
> highest release available. They don't have 12.1T or
> higher available for 4000/4000-M.
>
> --- Circusnuts wrote:
> > I just bought my first "regular" 4000 router & have
> > an IOS question. I've
> > upgraded the boot ROM's to the latest (2001) 10.0
> > version & the FLASH board
> > (to the one that allows (2) 8 Meg FLASH sticks, as
> > apposed to the older
> > imbedded type), but I can't seem to get any IOS
> > above 11.3 to work. Even
> > though I have enough memory to run newer 4000
> > images, I get an insufficient
> > memory error.
> >
> > Any ideas ???
> >
> > Thanks in advance
> > Phil
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17337&t=17202
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
