Paul- sounds like you have old boot ROM's & new IOS. If you are using 10.0
or older ROM's, you are probably getting some sort of "no usable
interfaces." Break the boot & get into ROM mode to download something 11.2.
Until you get the 11.0 ROM's, older IOS should fix it.
All the best
Phil
----- Original Message -----
From: "Paul Brown"
To:
Sent: Tuesday, August 28, 2001 4:49 AM
Subject: 2503 serial problem please help [7:17510]
> Hi,
>
> I have just bought a 2503 with 4 mb of ram.The problem is that the serial
> interfaces on it dont even show up when you do a "sh int". The other
> interfaces seem to work fine.It is running IOS 10.2(5). Any suggestions as
> to why this might happen would be greatly appreciated
>
> Thanks
>
> Paul
>
>
> Please email [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17514&t=17510
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
