> Hello All > > Have somewhat of a unique situation. Have a client that is interested in > seeing if they would be able to pass tagged info through a firewall. I am > currently trying to test this in a Lab environment so I am just doing > "routing on a stick", to see if I can even get this config to work. I > currently cannot even ping the Default Gateways for the VLAN's. > > Configuration is as follows. > > SW A---VLAN 1, 4, 5 ------TRUNK ISL -----------VLAN 1, 4, 5 ---------RT A > w/ sub-ifs. > > I don't know whether the Subinterfaces are thowing off the firewall, or do > I need to put some type of route statements into the FW. It is a Lucent > Brick. Another strange thing is that when I was going from a 100Mb FD > port to the FW, the management station loses contact. Once I change the > port from the 100Mb FD to the 100Mb Hub portion the management console > comes back up. Previous to passing this through the FW I verified that all > the VLAN info was setup correctly. The rules on the FW are wide open as > well. If anyone has any info or ideas it would be greatly appreciated. > > Steven Kell Bates > Senior Systems Engineer, CCNP > comm 520-533-3998 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17569&t=17569 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
