Hi, I have a 3640 acting as a one-arm router to route between vlans. I would like to apply policy routing from vlan1 so that traffic leaving vlan2 from vlan1 is policy routed and traffic leaving vlan2 from other sources sees no policy. Is this possible even though policy routing affects inbound interfaces? Servers in vlan2 are behind a nat-ting firewall which translates legal ip's to 10. nets. I need internal users from their own 10. net to be able to access these servers behind the firewall and let the public have access thru the firewall. Presently, I have no problem with public access but my route-map wont send internally sourced traffic back the way it came. It gets sent out thru the firewall. vlan2 Servers <---------vlan1 internal users ^ | Public access Any help is greatly appreciated. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17618&t=17618 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
