Hello All Have somewhat of a unique situation. Have a client that is interested in seeing if they would be able to pass tagged info through a firewall. I am currently trying to test this in a Lab environment so I am just doing "routing on a stick", to see if I can even get this config to work. I currently cannot even ping the Default Gateways for the VLAN's. Configuration is as follows. SW A---VLAN 1, 4, 5 ------TRUNK ISL -----------VLAN 1, 4, 5 ---------RT A w/ sub-ifs. I don't know whether the Subinterfaces are thowing off the firewall, or do I need to put some type of route statements into the FW. It is a Lucent Brick. Another strange thing is that when I was going from a 100Mb FD port to the FW, the management station loses contact. Once I change the port from the 100Mb FD to the 100Mb Hub portion the management console comes back up. Previous to passing this through the FW I verified that all the VLAN info was setup correctly. The rules on the FW are wide open as well. If anyone has any info or ideas it would be greatly appreciated. Steven Kell Bates Senior Systems Engineer, CCNP comm 520-533-3998 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17532&t=17532 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
