Actually, DSU/CSU interfaces can be either DTE or DCE. To connect one of
these to a DB-60 serial interface, you'll need a "media converter" (well
actually an external CSU/DSU).
Mark
-----Original Message-----
From: tu do [SMTP:[EMAIL PROTECTED]]
Sent: Thursday, August 30, 2001 12:54 PM
To: [EMAIL PROTECTED]
Subject: T1 connections [7:17898]
Hi every body,
I am working with my home lab. I have some DSU/CSU T1 interfaces:
-FT/T1 DSU/CSU for 2500 series
-WIC-1DSU-T1
They have RJ-45 connectors
I would like to connect them to other serial T1 interfaces which have DB-60
connectors. Would someone show me how and what kind of cable should I use
to
have it work out.
As I know, DSU/CSU are DTE interfaces ( if I am right ). THerefore, I
cannot
configurate two DSU/CSU interfaces back-to-back.
Thanks in advance,
Tu Do.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17907&t=17898
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
