(Expand window) Just wanted to get some feedback on a project I'm
starting.....

Current Topology:

          Internet
             |
             |
       External Router
             |
            Hub
           |    |
           |    |
          FW1  FW2 (running StoneBeat)
       (virtual IP=172.16.1.8)
           |    |
           |    |
        Layer 2 Switch
         (172.16.1.4)
             |
             |
             |
          Sw1-6500 (Running Hybrid w/dual SUP/MSFC-Routes all vlans)
          172.16.1.1
         |        |
         |        |
         |        |
      Layer 2 Access Switches (each switch trunks Staff and Student vlans to
Sw1)

Default route for above MSFC:
ip route 0.0.0.0 0.0.0.0 172.16.1.8

I'm running HSRP between SUP#1/MSFC#1 and SUP#2/MSFC#2


What the Future Topology with an extra 6500 in the mix will look like:


          Internet
             |
             |
       External Router
             |
            Hub
           |    |
           |    |
          FW1  FW2 (running StoneBeat)
       (virtual IP=172.16.1.8)
           |    |
           |    |
        Layer 2 Switch
         (172.16.1.4)
          |      |
          |      |
          |      |
      Sw1-6500  Sw2-6500  (Both running Hybrid w/dual SUP/MSFC...Routes all
vlans)
         |        |
         |        |
      Layer 2 Access Switches (each switch trunks Staff vlan 10 to Sw1 and
Student vlan 20 to Sw2)

I want the most efficient way to route to internet, see below....

Here's how I plan on configuring HSRP for all of my vlans:

Sw1-6500                                                 SW2-6500
Slot1                                                          Slot1

Sup#1/MSFC#1                                         Sup#1/MSFC#1
HSRP Active Vlan 10:Priority 110               HSRP Standby Vlan10:Priority
108
HSRP Standby Vlan20:Priority 109             HSRP Standby Vlan20:Priority
107

Sup#2/MSFC#2                                          Sup#2/MSFC#2
HSRP Active Vlan 10:Priority 108                HSRP Standby Vlan10:Priority
110
HSRP Standby Vlan20:Priority 107               HSRP Standby Vlan20:Priority
109

My question is what's the best way to have Staff vlan10 go to the internet
from SW1 and have
Student vlan20 go to the internet through Sw2? I know I could have the same
config as above (vlans 10 and 20)
for vlan172 (172.16.1.0 network), but then all vlans would have to exit
through only one of the switches.

Anyone have any suggestions or should I just run the default route for all
vlans out one switch? I really wanted to share the
load evenly between the two.

Thanks in advance.




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17999&t=17999
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to