Can u please give some example??
DO u mean that subinterfaces should be configured for some vlan other than
one??
Thanks for the help
>From: "Thomas N."
>Reply-To: "Thomas N."
>To: [EMAIL PROTECTED]
>Subject: Re: Working ISL/DOT1Q config [7:18070]
>Date: Sat, 1 Sep 2001 00:31:13 -0400
>
>I ran into this problem before. The way you configure would work only if
>you encapsulate using ISL. If you use the dot1q, you have to configure the
>physical interface FE0/0 with a management VLAN (VLAN 1 by default).
>Sub-interfaces will be assigned a different VLAN and encapsulated with
>dot1q.
>
>
>
>""Cisco Lover"" wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi friends..
> >
> > Can any one send me any working configuration for trunking using cat5
>for
> > intervlan routing..
> >
> > I have followed all the instructions in books and everwhere but still
>cant
> > get it work..Donot know where I m wrong.(Config atttached)
> >
> > Thanks for the help..
> >
> > Cisco Lover
> >
> >
> > FE router:
> >
> >
> > interface FastEthernet0/0
> > no ip address
> > no ip directed-broadcast
> > speed 100
> > full-duplex
> > !
> > interface FastEthernet0/0.1
> > encapsulation dot1Q 1
> > ip address 190.100.1.10 255.255.255.0
> > no ip directed-broadcast
> > !
> > interface FastEthernet0/0.2
> > encapsulation dot1Q 2
> > ip address 190.100.2.10 255.255.255.0
> > no ip directed-broadcast
> >
> > Router1
> >
> > interface Ethernet0
> > ip address 190.100.1.1 255.255.255.0
> > no ip directed-broadcast
> >
> > router2
> > interface Ethernet0
> > ip address 190.100.2.1 255.255.255.0
> >
> > CAtalyst:
> > port32:Vlan1
> > port33:vlan2
> >
> > set interface sc0 1 190.100.1.20/255.255.255.0 190.100.1.255
> >
> > set interface sl0 down
> > set interface me1 down
> > set ip route 0.0.0.0/0.0.0.0 190.100.1.10
> > !
> > #syslog
> > set logging level cops 2 default
> > !
> > #set boot command
> > set boot config-register 0x2
> > set boot system flash bootflash:cat4000.5-5-1.bin
> > set boot system flash bootflash:cat5000-sup3.4-2-1.bin
> > set boot system flash bootflash:cat4000.5-4-2.bin
> > !
> > #module 1 : 2-port 1000BaseX Supervisor
> > !
> > #module 2 : 34-port 10/100/1000 Ethernet
> > set vlan 2 2/33
> > set port speed 2/34 100
> > set port duplex 2/34 full
> > clear trunk 2/34 3-1005
> > set trunk 2/34 nonegotiate dot1q 1-2
> >
> >
> >
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
>http://explorer.msn.com/intl.asp
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18161&t=18070
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
