You could have checked my first email on this subject. It has a link that
has a nicely formatted table that compares all of the Cat 5000 modules. It
shows the Model Number, Number of Ports, Number of Slots, Connector Type,
Broadcast Suppression, ISL, 802.IQ/P, Ether-Channel, Inline Rewrite, 802.3x
Flow Control, and WRED
> -----Original Message-----
> From: kym blair [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, September 01, 2001 9:11 PM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: RE: Please Advice:Trunking problem [7:18170]
>
>
> URL is: (watch line-wrap)
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/hardwa
> re/modules/04ether.htm
>
> PDF FORMAT:
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/hardwa
> re/modules/04ether.pdf
>
>
>
>
> >From: "Frank B"
> >Reply-To: "Frank B"
> >To: ,
> >CC: "Leigh Anne Chisholm" ,
> >Subject: RE: Please Advice:Trunking problem [7:18170]
> >Date: Sat, 1 Sep 2001 14:35:12 -1000
> >
> >It's probably a limitation of the module...some older modules do
> trunk but
> >will only encapsulate with isl. There's a matrix buried somewhere in the
> >bowels of CCO that shows which module has what features.
> >
> >Aloha, Frank
> >
> >-----Original Message-----
> >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> >Leigh Anne Chisholm
> >Sent: Saturday, September 01, 2001 1:58 PM
> >To: [EMAIL PROTECTED]
> >Subject: RE: Please Advice:Trunking problem [7:18170]
> >
> >
> >Is there a 5224R? I can't find one on Cisco's site. I did
> however find a
> >WS-X5225R and it does trunking...
> >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > MADMAN
> > > Sent: Saturday, September 01, 2001 4:33 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: Please Advice:Trunking problem [7:18170]
> > >
> > >
> > > You need the 5224-R for trunking support
> > >
> > > Dave
> > >
> > > Cisco Lover wrote:
> > >
> > > > Hi guys,
> > > >
> > > > Trying to run ISL/DOt1Q trunking on my cat5,but getting this error.
> > > > Console> (enable) set trunk 3/1 on dot1q 1
> > > > Feature not supported on Module 3.
> > > >
> > > > Is that due to IOS???if yes ,please advice required IOS for
> > > this module.
> > > >
> > > > Thanks.
> > > >
> > > > Console> (enable) sh ver
> > > > WS-C5505 Software, Version McpSW: 5.5(5) NmpSW: 5.5(5)
> > > > Copyright (c) 1995-2000 by Cisco Systems
> > > > NMP S/W compiled on Dec 14 2000, 17:42:24
> > > > MCP S/W compiled on Dec 14 2000, 17:37:38
> > > >
> > > > System Bootstrap Version: 3.1.2
> > > >
> > > > Hardware Version: 1.0 Model: WS-C5505 Serial #: 066546807
> > > >
> > > > Mod Port Model Serial # Versions
> > > > --- ---- ---------- ---------
> ----------------------------------------
> > > > 1 0 WS-X5530 012758150 Hw : 3.0
> > > > Fw : 3.1.2
> > > > Fw1: 4.2(1)
> > > > Sw : 5.5(5)
> > > > WS-F5521 011477888 Hw : 1.1
> > > > 3 24 WS-X5224 011795763 Hw : 1.4
> > > > Fw : 3.1(1)
> > > > Sw : 5.5(5)
> > > >
> > > > DRAM FLASH NVRAM
> > > > Module Total Used Free Total Used Free Total Used
> >Free
> > > > ------ ------- ------- ------- ------- ------- ------- ----- -----
> >-----
> > > > 1 32640K 19331K 13309K 8192K 5575K 2617K 512K 170K
> >342K
> > > >
> > > > Console> (enable) sh flash
> > > > -#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------
> >name
> > > > 1 .. ffffffff 89280598 4f19f0 22 4921710 Jul 09 2001 09:41:19
> > > > cat5000-sup3
> > > > .5-5-5.bin
> > > >
> > > > 2680336 bytes available (4921840 bytes used)
> > > >
> > > > _________________________________________________________________
> > > > Get your FREE download of MSN Explorer at
> > > http://explorer.msn.com/intl.asp
> > > --
> > > David Madland
> > > CCIE# 2016
> > > Senior Network Engineer
> > > Qwest Communications
> > > 612-664-3367
> >**Please read:http://www.groupstudy.com/list/posting.html
> _________________________________________________________________
> Get your FREE download of MSN Explorer at
> http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18214&t=18170
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
