A bit late with the response, but never mind...
>From that document...
"To implement this configuration, you need the following:
Cisco IOS. Software Release 11.3 or later "
Doesn't quite fit with the stated IOS of 10.2 in the original mail.
I seem to recall asking the TAC about this quite a while ago (would have
been IOS 11.2 I was asking about) and the response was that it couldn't be
done. My memory is a bit hazy though so if anyone contradicts me I won't
be offended :-)
JMcL
----- Forwarded by Jenny Mcleod/NSO/CSDA on 03/09/2001 12:01 pm -----
"Bill
Carter"
cc:
Sent by: Subject: RE: cisco 2503
[7:17663]
nobody@groups
tudy.com
30/08/2001
12:04
am
Please
respond
to
"Bill
Carter"
yes.
http://www.cisco.com/warp/customer/793/access_dial/ip_nego.html
^-^-^-^-^-^-^-^-^-^-^
Bill Carter
CCIE 5022
^-^-^-^-^-^-^-^-^-^-^
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
ofalt andy
Sent: Wednesday, August 29, 2001 8:22 AM
To: [EMAIL PROTECTED]
Subject: cisco 2503 [7:17663]
Can an ISDN Cisco 2503 with IOS 10.2 be configured to dial into an ISP
that does not assign static IPs on its ISDN dial-in lines? You do not know
the next hop router and the ISDN box on the ISPs end may or may not be a
Cisco.
Andy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18273&t=17663
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
