I have checked on the neighbouring routers as well but cant see these
summary addresses any where else.
What I beleive is that I should be able to see these summary address in
local routing table,before I can see them any where else. Like u can see
the summary address of IGRP routes ,coming from FR router and redistributiig
to OSPF domain after redistribution.
>From: "EA Louie"
>To: "Cisco Lover" ,
>Subject: Re: URGENT:FOR Routing experts:Plz help!!! [7:18370]
>Date: Mon, 3 Sep 2001 23:21:58 -0700
>
>Look at the routing table for the next IGRP router to see the effects of
>your redistribution. The OSPF summary routes won't be shown on ISDN2 -
>you'll have to look at the the next downstream IGRP router to see them,
>because the redistribution effect happens not at the ASBR, but outside the
>OSPF domain.
>
>You aren't seeing the effects of IGRP redistribution at this point either,
>because those routes would show up as O E2 routes in the routing table.
>Look on your next downstream OSPF router for those external routes to
>appear.
>
>----- Original Message -----
>From: "Cisco Lover"
>To:
>Sent: Monday, September 03, 2001 10:46 PM
>Subject: URGENT:FOR Routing experts:Plz help!!! [7:18370]
>
>
> > Hi guys.
> >
> > facing some strange IGRPOSPF redistribution problem.
> >
> > Router ISDN2 is ASBR ,running IGRP with FR and running ospf with rest of
> > network.
> >
> > Now problem is that I am able to redistribute IGRP into OSPF and can see
>the
> > IGRP routes as OSPF external in ospf domain but not able to get
> > redistributed OSPF routes into IGRP.
> >
> > Offcourse, No static/default routes are allowed so I have summarize ospf
> > routes into C class,(Same as IGRP major interface)using summary address
> > command .But still not able to get these routes redistributed.
> >
> > When I tried by using Static routes pointing to null 0,IT WORKED>
> >
> > The problem I observed is that although I have put SUMMARY ADDRESS
>commands
> > for network 152.1.1.0 & 152.1.2.0 ,which are required to redistribute
>into
> > IGRP,I CANT see them as summary routes in ISDN2 router wHY>>>>??
> >
> >
> > Any one can help Please.....All config attached
> > Thanks a lot!!!
> >
> >
> > !ISDN2
> >
> > !
> > interface Loopback0
> > ip address 152.1.12.1 255.255.255.0
> > no ip directed-broadcast
> > !
> > interface Ethernet0/0
> > ip address 152.1.0.1 255.255.255.0
> > no ip directed-broadcast
> > no cdp enable
> > !
> > interface Serial0/0
> > no ip address
> > no ip directed-broadcast
> > no ip mroute-cache
> > shutdown
> > no fair-queue
> > no cdp enable
> > !
> > interface BRI0/0
> > ip address 152.1.1.18 255.255.255.252
> > no ip directed-broadcast
> > encapsulation ppp
> > ip ospf demand-circuit
> > dialer idle-timeout 1000
> > dialer map ip 152.1.1.17 name ISDN1 broadcast 2465640
> > dialer-group 1
> > isdn switch-type basic-net3
> > no cdp enable
> > ppp chap hostname cisco
> > ppp chap password 7 02050D480809
> > !
> > interface Ethernet0/1
> > bandwidth 1111
> > ip address 152.1.11.1 255.255.255.0
> > no ip directed-broadcast
> > no keepalive
> > no fair-queue
> > no cdp enable
> > !
> > interface Serial1/0
> > bandwidth 172
> > backup delay 5 20
> > backup interface BRI0/0
> > ip address 152.1.10.2 255.255.255.128
> > no ip directed-broadcast
> > no fair-queue
> > clockrate 64000
> > no cdp enable
> > !
> > interface Serial1/1
> > no ip address
> > no ip directed-broadcast
> > encapsulation frame-relay
> > clockrate 64000
> > frame-relay intf-type dce
> > frame-relay route 100 interface Serial1/4 300
> > !
> > interface Serial1/2
> > no ip address
> > no ip directed-broadcast
> > shutdown
> > no cdp enable
> > !
> > interface Serial1/3
> > no ip address
> > no ip directed-broadcast
> > encapsulation frame-relay
> > clockrate 64000
> > frame-relay intf-type dce
> > frame-relay route 201 interface Serial1/4 301
> > !
> > interface Serial1/4
> > no ip address
> > no ip directed-broadcast
> > encapsulation frame-relay
> > frame-relay intf-type dce
> > frame-relay route 300 interface Serial1/1 100
> > frame-relay route 301 interface Serial1/3 201
> > !
> > interface Serial1/5
> > no ip address
> > no ip directed-broadcast
> > shutdown
> > no cdp enable
> > !
> > interface Serial1/6
> > no ip address
> > no ip directed-broadcast
> > shutdown
> > no cdp enable
> > !
> > interface Serial1/7
> > no ip address
> > no ip directed-broadcast
> > shutdown
> > no cdp enable
> > !
> > router ospf 64
> > area 0 authentication message-digest
> > area 1 virtual-link 152.1.2.5
> > area 2 nssa default-information-originate
> > summary-address 152.1.2.0 255.255.255.0
> > summary-address 152.12.0.0 255.252.0.0
> > summary-address 152.1.1.0 255.255.255.0
> > redistribute igrp 64 subnets route-map Hi
> > passive-interface Ethernet0/0
> > network 152.1.1.18 0.0.0.0 area 2
> > network 152.1.10.2 0.0.0.0 area 1
> > network 152.1.11.1 0.0.0.0 area 2
> > default-information originate always
> > !
> > router igrp 64
> > redistribute ospf 64 route-map CCIE
> > passive-interface Ethernet0/1
> > passive-interface Serial1/0
> > network 152.1.0.0
> > default-metric 10000 100 255 1 1500
> > distribute-list 1 in Ethernet0/0
> > !
> > ip classless
> > no ip http server
> > !
> > access-list 1 permit 152.12.0.0
> > access-list 1 permit 152.13.0.0
> > access-list 1 permit 152.14.0.0
> > access-list 1 permit 152.15.0.0
> > access-list 10 permit 152.1.1.0
> > access-list 10 permit 152.1.2.0
> > access-list 20 permit 152.12.0.0
> > access-list 20 permit 152.13.0.0
> > access-list 20 permit 152.14.0.0
> > access-list 20 permit 152.15.0.0
> > dialer-list 1 protocol ip permit
> > no cdp run
> > route-map HI permit 10
> > !
> > route-map CCIE permit 10
> > match ip address 10
> > !
> > route-map Hi permit 10
> > match ip address 20
> > !
> > !
> > banner motd ^CHi how r u^C
> > !
> > line con 0
> > exec-timeout 0 0
> > password cisco
> > transport input none
> > line aux 0
> > line vty 0 4
> > login
> > !
> >
> > ISDN2#sh ip route
> > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS
>inter
> > area
> > * - candidate default, U - per-user static route, o - ODR
> > P - periodic downloaded static route
> >
> > Gateway of last resort is not set
> >
> > 152.1.0.0/16 is variably subnetted, 7 subnets, 4 masks
> > O 152.1.1.128/25 [110/1252] via 152.1.10.1, 01:08:11, Serial1/0
> > C 152.1.11.0/24 is directly connected, Ethernet0/1
> > C 152.1.10.0/25 is directly connected, Serial1/0
> > C 152.1.12.0/24 is directly connected, Loopback0
> > O IA 152.1.1.0/28 [110/1833] via 152.1.10.1, 01:08:11, Serial1/0
> > C 152.1.0.0/24 is directly connected, Ethernet0/0
> > O 152.1.2.0/30 [110/1162] via 152.1.10.1, 01:08:11, Serial1/0
> > I 152.12.0.0/16 [100/1600] via 152.1.0.2, 00:00:18, Ethernet0/0
> > I 152.13.0.0/16 [100/1600] via 152.1.0.2, 00:00:18, Ethernet0/0
> > I 152.14.0.0/16 [100/1600] via 152.1.0.2, 00:00:18, Ethernet0/0
> > I 152.15.0.0/16 [100/1600] via 152.1.0.2, 00:00:18, Ethernet0/0
> > O 152.12.0.0/14 is a summary, 01:08:00, Null0
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
>http://explorer.msn.com/intl.asp
>_________________________________________________________
>Do You Yahoo!?
>Get your free @yahoo.com address at http://mail.yahoo.com
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18379&t=18370
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
