First step from the > prompt enter o. >o
It should tell you what the present config register setting is. Post that
value. Then reask your question.
> -----Original Message-----
> From: xie rootstock [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 05, 2001 1:10 PM
> To: [EMAIL PROTECTED]
> Subject: console port broken, how can i login in router? [7:18651]
>
>
> i used aux port and telnet for login, but both only can into
> > mode, and i
> pressed ctrl+break to revise confreg, but not work, it seems
> the router
> ignore what i pressed.
>
> any segguestion?
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18665&t=18651
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
