"The Cisco 800 Series includes four ISDN routers, one serial router, and two
IDLS router models and a choice of software feature sets. The Cisco 801
model provides an ISDN Basic Rate Interface (BRI) ST interface for use
worldwide. The Cisco 802 adds the integrated NT1 network termination device
for use in North America. The Cisco 803 and 804 models add a four-port
Ethernet hub and two RJ-11 interfaces for telephone devices such as
telephones, fax machines, and modems. The Cisco 805 offers one serial port
for synchronous serial connections or asynchronous dial up connections with
an external modem. For IDSL connections, the Cisco 802 IDSL provides one
IDSL port with one Ethernet port and the Cisco 804 IDSL adds an integrated
4-port Ethernet hub."
Your 804 doesn't have 4 Ethernet interfaces but rather a 4-port Ethernet
hub.
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 06, 2001 9:11 AM
> To: [EMAIL PROTECTED]
> Subject: 804 missing interface [7:18806]
>
>
> can anyone guide me into the right direction with adding
> additional ethernet
> interfaces to my 804 router. It has 2 BRI interfaces with 4
> ethernet ports
> but I can only view 1 of the ethernet interfaces
> int 0 and both BRI interfaces
>
> I've tried to alter the config file on and off the router. ie.
> notepad with
> no success.
>
> Thanks in advance
>
> Chris
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18809&t=18806
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
