Howard,
The question is on SNA and NetBIOS are both DLSw+ payload, When use
priority queue we could only use ACL for IP traffic, and in IP ACL how could
you differentiate payload if it's a SNA or NetBIOS?
Thanks,
Jerry
----
From: "Howard C. Berkowitz"
Subject: Re: How do I give priority to the SNA 3270 [7:18720]
Date: Wed, 5 Sep 2001 23:29:18 -0400
> >Hi Group,
> >
> >I'm working on a lab scenario, the question is that one dlsw router needs
to
> >configure queueing so that "give priority to the SNA 3270 traffic over
the
> >NetBIOS traffic, Make sure that if the serial link becomes congested that
> >all SNA are delivered first".
> >
> >I don't know in priority queueing how could I differentiate these two
> >traffic, any help is appreciated.
> >
> >BTW, this is not from real lab, I haven't taken it yet.
> >
> >Jerry
>
>
> Some hints:
>
> How do DLSW (and, for that matter, RSRB) encapsulate SNA and NetBIOS?
> What is different in an encapsulated packet?
>
> If there were differences in priority among RSRB or DLSW, how would
> the encapsulated packets differ?
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18893&t=18720
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
