Thanks to all who responded for this question. I shall try all the options
and will
shoot a mail to let everyone know which one worked.
Thanks
Rajesh
"[EMAIL PROTECTED]" wrote:
> ----- Original Message -----
> From: "David Goddard"
> To:
> Sent: Friday, September 07, 2001 6:06 PM
> Subject: RE: OSPF authentication question. [7:18813]
>
> > rajesh,
> >
> > I just experienced the same problem in a lab this week. If you
establish
> > OSPF neighbors ok w/out authentication, and your debug shows that you are
> > failing on mismatch authentication, try redoing your command by removing
> it
> > and reentering it... I don't know why this worked for me, and I KNOW I
> > didn't misstype or mispell the word I used for authentication (cisco). I
> > deleted the entry, and reentered, and viola! The only other thing you
> could
> > try is to reload the affected router... I have seen some quirky things
> > lately that seem to clear with a reload. Bill Gates would be so proud.
> >
> > hth,
> > Dave
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of pikumar.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18994&t=18813
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
