Yeah, I am starting to realize that now.
That kind of sucks I must say.
Well, what can you do.
I am leaving for a needed cold one or two.
Have a great weekend,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Rik Guyler [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 07, 2001 4:50 PM
To: [EMAIL PROTECTED]
Subject: RE: IP address on two VLAN's [7:19050]
Ole my old friend, what are you tearing up now? ;-}
Your problem is one of not enough virtual interfaces. From a switch
perspective, it only needs a single management interface, which by default
is the "vlan 1" interface on vlan 1. If you create a "vlan 13" or other,
then you would have to "shutdown" the "vlan 1" interface first then bring up
the new management interface.
---
Rik Guyler
-----Original Message-----
From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 07, 2001 4:32 PM
To: [EMAIL PROTECTED]
Subject: IP address on two VLAN's [7:19050]
I have a 2924 with all ports on VLAN1 and VLAN1 set with an IP address on
network 10.0.0.0/8.
I was not using more than half the ports, so I created a VLAN13 and moved
ports 17 thru 24 over on it.
So far, so good.
Now, I wanted to give VLAN13 an IP address on network 192.168.0.0/24 so I
can telnet to it if on one of the computers connected to VLAN13 on that LAN,
but the VLAN13 keeps being in SHUTDOWN mode even if I do a conf t, int
vlan13, no shut.
What am I missing here?
Thanks and have a great weekend,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19058&t=19050
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
