You are missing the ip pim x command withing the Interface Tunnel config.
""kwock99"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
>
> Just checking anyone has the experience on the multicast tunnelling
> configuration.
>
> I have configured three routers to use the Sparse mode for multicast
traffice
> and they works perfectly.
>
> After I remove the centre router command, "ip pim sparse-mode" and try to
use
> the tunnel to conect the first and third router. I have problem.
>
> I use the following command to config the tunnel within the first and
third
> router.
>
> interface tunnel0
> ip unnumbered type number
> tunnel source ip-addressa
> tunnel destination ip-address
>
> It seems that the mulitcast traffic does not go to the tunnel
automatically.
> I
> have tried the ip mroute 0.0.0.0 0.0.0.0 tunnel0. And it does not help.
For
> simplicity, I use all the ethernet port for the connection.
>
> Any suggestion would be highly appreciated.
>
>
> Francis
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19273&t=19267
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
