Its certainly possibel in the Uk to run 2 separate BRI links with one D
channel and in certain areas it is also possible to use the D channel for
free voice calls. The D channel is not linked to a specific B channel and is
not 'owned' by a B channel once a link is up. You just have to be careful,
about the configuration and be happy tu run a B channel at 100% with no
additional capacity
Rick Harville wrote:
>
> This is a fine group and I lurk here often, please help if you
> can...
>
> Does anyone know if its possible to setup two C2503's back to
> back over a single ISDN line, assigning one spid to one router
> and the other spid to the second router?
>
> I have 2 Cisco 2503's with st Bri. Im using Motorola NT1 device
> with a single U interface and 2 ST ports. I have at my disposal
> a single ISDN line from SW Bell. I would like to split the
> spids at the nt1 device and practice my DDR with only one spid
> on each router.
>
> If this is possible, please forward any info you might have on
> exactly how to do this? Thanks in advance.
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19388&t=19312
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
