or just a plain old "clear int e0" ----- Original Message ----- From: "Farhan Ahmed" To: Sent: Wednesday, September 12, 2001 12:00 AM Subject: RE: Troubleshooting ethernet interface on a 2501 router [7:19545] > set keep alives > also tryy shut and no shut > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 12, 2001 10:03 AM > To: [EMAIL PROTECTED] > Subject: Troubleshooting ethernet interface on a 2501 router [7:19543] > > > Hello All: > > When I remove the UTP cable off the ethernet transceiver my router responds > with a "Ethernet0 is UP, line protocol is down"...however when I reconnect > the cable...it won't come back up....why is that and how do I fix it? This > is strictly in a lab environment..but I'm trying to find out why it can't > synch up again. Is there a setting that I have to retype to tell it the > line > is connected?? > > Any thoughts on this is greatly appreciated. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=19546&t=19546 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
