clearly we will route them from eth to wan by frame relay
""Patrick Donlon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> In short yes, once you've packetised the voice you can just route it like
> any other ip packets
>
> cheers Pat
>
>
> ""Cisco Breaker"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi all,
> >
> > I have a question regarding to Voice over IP. Is it possible to make
voice
> > over IP connections on eth and distributing it by ip over frame relay by
a
> > different vendors router?.
> >
> > Let me explain this scenerio in detail. You have a wide area network
> > connected by a frame relay cloud with Motorola routers. The main
Motorola
> > router is connected to PBX by 2 E&M ports. And it is the wide area
> > connection by ip over frame relay to the frame relay cloud. We want to
> > connect a cisco 1750 router to ethernet and its fxs port to PBX of the
> > company. Is it possible to put another 1750 to the other side of the
frame
> > relay cloud and put its FXS to its PBX and make these to areas talk
voice
> > over ip like below figure.
> >
> > ETH
> > -----------------------------------
> > | |
> > | |
> > Eth Eth
> > Cisco 1750 Mot 6560 s0--FRAME RELAY and IP--s0 Cisco
> > FXS E&M CLOUD
> 1750
> > | |
> > FXS
> > | | ---P
> > |
> > |---------------------B
> > Telephone
> > | X
> > Telephone
> >
> > Best regards,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19602&t=19590
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
