1) do your other routers have static routes to the gateway?
2) do you have a RIP router someplace, and are you redistributing RIP into
EIGRP?
3) are you advertising a default network via EIGRP?
configs help
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
khramov
Sent: Wednesday, September 12, 2001 8:32 AM
To: [EMAIL PROTECTED]
Subject: eigrp routing [7:19603]
I have a static route on my core router to the firewall. However, when
I do sh ip eigrp topology it shows that there are two routes to the
firewall through other routers in a topology table. Since firewall does
not respond to traceroute how can I test the network.
I am sure that it is using staic route, but why does it have two other
entries in the topology table.
Trying to learn eigrp.
Thanks for your input,
Alex
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19705&t=19603
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
