First guess, use OSPF demand circuit. Second guess, use snapshot routing.
HTH,
Kent
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Erlend Ringstad
Sent: Monday, September 17, 2001 6:25 AM
To: [EMAIL PROTECTED]
Subject: trick-question [7:20164]
"Configure the ISDN line between R3 and R2 so that it will come up for any
IP
traffic in the event of a failure in the Frame Relay circuit between R2 and
R3.
Do not use static routes of any kind (including floating statics) and do not
use the
backup-interface command or watch-groups to complete this task."
from a CCIE prep-test-lab, any ideas?
--erlend
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20188&t=20164
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
