If you want cisco genuine cables you have to order two cables, usually v.35
male DTE and v.35 female DCE. I've got a cable here with part# 72-0791-01
(i think this is an old part #) which is the DTE male. I also have the v.35
female DCE cable which has part # CSV35FC-10 (I think this is more current
than the other). You get some benefit from having the DTE cable that can be
used for a real connection. These cables are for the high density db60 on a
2500 and other routers.
It's cheaper to buy a single cable designed for back to back from a generic
cable manufacturer. Plus you can get them shorter so you don't have 15
extra feet of cable to deal with
hope this is helpful
dave h
-----Original Message-----
From: Robert Fowler [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 21, 2001 11:31 AM
To: [EMAIL PROTECTED]
Subject: DCE to DTE Back to Back Cable Part number [7:20690]
After searching my Cisco Part list, my products reference guide and the cco,
I cannot find the part number for a DCE to DTE back to back cable, I am
needing one for my lab at work, but we have to have the Cisco part number to
order. Any help would be appreciated!
Thank You,
Robert Fowler
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20726&t=20690
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
