Turn on portfast, which causes a switch port to go into forwarding mode
more quickly. I bet the Macintoshes didn't receive AppleTalk parameters
correctly because the switch port didn't start forwarding while they were
booting and starting up AppleTalk.
Priscilla
At 07:01 AM 9/23/01, king kaung wrote:
>Hi All,
>
>I have big problem with our apple machines. Last week, I replaced my old
>3Com switches to cisco 3524 switches. Then most of my apple machine can not
>see each other(cannot access appleshare)but it can see and can access PC
>Servers. I try to configure the speed and duplex according apple's NIC
>specification on individual ports. But some of the apple machine still
>cannot see. I put those Mac machines back to 3Com switch and it works again.
>
>We don't have zone setting on apple machines.The protocols are all
>default.Our network is flat network and no subnet, no VLAN.
>
>Anything I miss out to configure on my Cisco switches? Or any special
>setting for apple machines I need to set?
>
>Many thanks,
>Moe.
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
________________________
Priscilla Oppenheimer
http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20837&t=20825
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
