Wow--what timing. I'm just writing a section on troubleshooting ISDN... Try "debug ISDN ppp authentication". You should see why you've got a failure problem. I suspect you've got a problem with the usernames and passwords not matching.
-- Leigh Anne > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Omer Ehsan Dar > Sent: Sunday, September 30, 2001 9:34 PM > To: [EMAIL PROTECTED] > Subject: PPP Authentication [7:21533] > > > Hi all, > I just wanted to know how i can get pp authentication to work. When I > enable either PAP or chap the line protocol goes down. The debug PPP > negotiation output says that the request was timed out. > What I did then was I took an example out of the CCNA manual and even > When I did exactly that word for word it still did not work. I have > given both the remote router username and the password. the things work > out till encapsulation ppp but the minute I enter ppp authentication PAP > or CHAP the IPCP is closed. > any suggestions?? > Thnaks > Omer Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21538&t=21533 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
